Husqvarna 325HD60x Double Sided Hedge Trimmer with FREE gifts

Double-sided hedge trimmer. The Husqvarna 325HD60x has been developed to combine good ergonomic design with high quality and excellent cutting performance. This machine is equipped with LowVib for lower vibration levels.

The professional machine.
The 323, 325, 327 all have a highly developed 'E tech' engine used extensively across the garden machinery range. They all have 'E' start and air purge systems making for very rapid starting (usually only a few pulls).

All HD machines have exhaust pipes directed along the blades, so no hot gasses near you or scorching the hedge.

One of the main advantages of the HD and HS range is something may never see - the clutch.
Most other clutch systems engage at 3000 rpm and work at 10 to 11000 rpm.

When one day you hit that invisible steel railing hidden in the hedge, long before the clutch disengages, you will have certainly damaged either the gear box or blades. This is the most common repair we do with other makes of hedge trimmers.

The HD and HS clutch is very small and does not engage fully until much higher revs. So when you do hit that steel rail the clutch disengages much quicker, causing less damage (if any).

The gear box has 2 balanced con rods which run on needle roller bearings. It also has the facility to turn the blades manually to get precise adjustments of the blades.

The chassis (handle frame) is spring suspended, for all day comfort.

The blades are hardened steel, fully adjustable, all teeth have ground tapered tips.

Automatic Smart Start
E-TECH
LowVib
Adjustable rear handle
Comfort handles
Soft grip

Fuel pump designed for very easy starting.
The gear components have been developed for long life under tough conditions.
The E-TECH engine combines reduced exhaust emissions with a superior power/weight ratio.

Engine specification
Cylinder displacement 24.5 cm³ / 1.5 cu.inch
Cylinder bore 34 mm / 1.34 inch
Cylinder stroke 27 mm / 1.06 inch
Power output 0.7 kW / 0.94 hp(I)
Maximum power speed 9000 rpm
Maximum recommended engine speed 11600 rpm
Carburettor Zama C1Q
Fuel tank volume 0.5 lit / 16.91 fl oz
Fuel consumption 600 g/kWh
Emission, vibration & noise data Equivalent vibration level (ahv , eq) front / rear handle 2.4/3.8 m/s²
Sound pressure level at operators ear 100 dB(A)
Guaranteed sound power level, LWA 109 dB(A)
Exhaust emissions (CO average) 304 g/kWh
Exhaust emissions (HC average) 121 g/kWh
Exhaust emissions (NOx average) 1.2 g/kWh
Exhaust emissions (CO² average) 1228 g/kWh
Transmission data Gear ratio 4.9:1

Equipment
Knife Length 60 cm / 24 inch
Teeth opening 26 mm / 1.02 "
Recommended maximum twig diameter 22 mm / 0.87 "
Cutting speed 4695 cut/min

Overall dimensions
Weight 5.6 kg / 12.3 lbs