Husqvarna 325HS99x Single Sided Hedge Trimmer

This is the same as the single-sided 325HS75x, but with the big 99cm blade, and the 325 power unit has no problem driving the big blade. Double or single, the choice is yours.

The Husqvarna 325HS99x hedge cutter has been developed to combine good ergonomic design with high quality and excellent cutting performance. This machine is equipped with LowVib for lower vibration levels.

The professional machine.
The 323, 325, 327 all have a highly developed 'E tech' engine used extensively across the garden machinery range. They all have 'E' start and air purge systems making for very rapid starting (usually only a few pulls).

All HD machines have exhaust pipes directed along the blades, so no hot gasses near you or scorching the hedge.

One of the main advantages of the HD and HS range is something may never see - the clutch.
Most other clutch systems engage at 3000 rpm and work at 10 to 11000 rpm.

When one day you hit that invisible steel railing hidden in the hedge, long before the clutch disengages, you will have certainly damaged either the gear box or blades. This is the most common repair we do with other makes of hedge trimmers.

The HD and HS clutch is very small and does not engage fully until much higher revs. So when you do hit that steel rail the clutch disengages much quicker, causing less damage (if any).

The gear box has 2 balanced con rods which run on needle roller bearings. It also has the facility to turn the blades manually to get precise adjustments of the blades.

The chassis (handle frame) is spring suspended, for all day comfort.

The blades are hardened steel, fully adjustable, all teeth have ground tapered tips.

Hardened taper ground blades
'E' tech engine with 'E' start
Small clutch
Electronic speed governing
Adjustable blades with manual turning
Routeing of exhaust pipe
Automatic Smart Start
E-TECH
LowVib
Comfort handles

Very powerful - rapid cutting
Lower emissions
Low vibrations
Clean cuts in soft material
Will take on thicker branches
Ergonomic handling
Fuel pump designed for very easy starting.
The gear components have been developed for long life under tough conditions.
The E-TECH engine combines reduced exhaust emissions with a superior power/weight ratio.

Engine specification
Cylinder displacement 1.5 cu.inch / 24.5 cm³
Cylinder bore 34.0 mm
Power 1.2 hp / 0.9 kW
Maximum power speed 9000 rpm
Maximum recommended engine speed 11500 rpm
Type of carburator Zama C1Q
Gear ratio 4.9:1

Equipment
Recommended maximum twig diameter 22 mm
Teeth opening 26 mm
Fuel tank volume 1 US pint / 0.5l
Fuel consumption 600 g/kWh
Knife length 39" / 100 cm
Cutting speed 4694 cut/min

Emission, vibration & noise data
Vibrations idling front/rear handle 2.5 m/s² / 2.2 m/s²
Vibration top speed front/rear handle 4,0 m/s² / 2,4 m/s²
Sound level, min/max 96 dB(A) / 96 dB(A)
Noise emission, LWA 109 dB(A)
Emission, HC 137 g/kWh
Emission, NOx 1.1 g/kWh
Emission, CO 350 g/kWh

Overall dimensions
Weight 12.8 lbs / 5.8 kg




Overall dimensions
Weight 12.1 lbs / 5.5 kg